Compact 5.6" touch-LCD auto lensmeter with UV-Tx, ABBE number and progressive recognition. Workhorse for opticals that need full functionality in a small footprint.
Clinical overview
The D-903 is a compact, light auto lensmeter that doesn’t cut corners on capability. A 5.6" tilting touch-LCD drives the menu; UV transmissivity, automatic progressive measurement and contact-lens mode are all built in — the same feature set as larger benchtop units in a slimmer chassis.
| Sphere | 0 to ±25 D (0.01 / 0.12 / 0.25 D step) |
|---|---|
| Cylinder | 0 to ±9.99 D (0.01 / 0.12 / 0.25 D step) |
| Axis | 0° to 180° (1° step) |
| ADD | 0 to +9.99 D (0.01 / 0.12 / 0.25 D step) |
| Prism | 0 to 15Δ (0.01 / 0.12 / 0.25Δ step) |
| Lens diameter | Ø20 to 108 mm |
| PD range | 45 to 90 mm (0.25 mm step) |
| Speed | 0.1 s |
| Display | 5.6" TFT LCD touch |
| Printer | Thermal |
| Dimensions / weight | 222 × 161 × 372 mm / ~5 kg |
| Power | 100–120 V / 200–110V/220V, 50/60 Hz |
Smaller opticals and clinic dispense desks that need full auto-lensmeter functionality — UV, ABBE, progressive, contact — without sacrificing counter space.
Available on request
The full spec + documentation pack for this device ships ahead of purchase on request. A sales engineer responds within one business day.
Configuration sheet
Sizes and dimensions, material and finish, compatible instruments and screw references, what ships in the set, lead time and warranty — all in one specification sheet, sent within one business day.
Documents & downloads
This device's IFU, CE Declaration of Conformity, ISO 13485 certificate and (where applicable) FDA 510(k) clearance ship with the order. Reach out below for the pack ahead of purchase.
Get in touch
Our clinical sales team will scope quantities, voltage, accessories and regulatory paperwork — usually within one business day.
We've been using this in our clinic for a few weeks now and it's held up well to consistent daily use. Though the instructions could be a little clearer. Does the essentials adequately.
Emily Green, Practice OwnerVerified buyerJun 1, 2026
Been putting it through daily use in the clinic and setup was straightforward with clear documentation. The value at this price point is hard to beat. Does precisely what we needed.
Dr. Carlos Clarke, ODVerified buyerMay 7, 2025
This has quickly earned its place in our exam room — it's stayed accurate and reliable throughout. It's held up well to consistent daily use. No complaints so far.
Paul Baker, Optometric TechnicianVerified buyerAug 13, 2024
The LM-260 is a desktop auto lensmeter for verifying single-vision, bifocal and progressive lens prescriptions, with sphere, cylinder, axis, prism and addition measurements as part of the standard workflow. Prism measurement on the dispensing bench is helpful for verifying made-to-order glasses with prescribed prism corrections. The desktop format suits optical dispensaries, optometry practices and lens-finishing labs. A solid everyday verification tool for mid-range dispensing setups.
The CCQ-1100 is an automatic lensmeter built around a Hartmann sensor with 165 sampling points and a high-speed dual-core processor. It performs automatic recognition of single-vision, multifocal, and progressive lenses, and includes blue light measurement and UV protection display functions. It is intended for optical labs, dispensing opticians, and clinics that need a daily lensmeter for prescription verification. It is supplied as a desktop unit for the dispensing or finishing bench.
The L-5000B is a desktop auto lensmeter for verifying single-vision, bifocal and progressive lens prescriptions on the dispensing bench. It covers the standard spectacle-lens range optical dispensaries need for everyday quality control and incoming-lens checks. The desktop format and straightforward operation suit busy optical retail counters and lens-finishing labs. A practical core instrument for any optical dispensary.
The HV-100 is an auto lensmeter built around Hartmann wavefront analysis for verifying single-vision, bifocal and progressive lens prescriptions. Wavefront-based reading helps the device handle progressive add zones and complex lens designs that classic green-light lensmeters can find harder to map. Aimed at optical dispensaries, optometry practices and lens-finishing labs that need a reliable verification step. A practical core tool for any modern optical retail or lab workflow.
The L890 is an auto lensmeter built around a Hartmann array sensor with a green LED light source and a 7-inch color touch screen for everyday lens verification. It reports sphere, cylinder, axis, PD and PH, supports colored lenses down to 10% transmittance and reads down to ±0.12 D minimum lens power. Optional PD/UV measurement and a thermal printer let the device grow with the dispensary's workflow. Aimed at optical retail, optometry practices and finishing labs looking for a flexible mid-range lensmeter.
The LM-900 is a desktop auto lensmeter using a Hartmann sensor with 108 measurement points and a 0.1-second reading time, aimed at busy dispensing benches that need quick lens checks. Measurement ranges cover sphere up to ±25 D, cylinder up to ±9.99 D, axis across 0-180 degrees and reading addition up to 9.99 D, with prism up to 15Δ. A 3.5-inch color LCD touch display keeps the workflow simple, and the 3 kg form factor stays out of the way on the bench. This variant ships without a printer and without binocular PD, keeping the unit focused on core verification.
The HV-300 is an auto lensmeter that measures single-vision, bifocal, progressive and contact lens powers in one device, extending the standard spectacle-lens workflow into contact-lens verification. Contact-lens measurement makes it useful for practices that fit and replace soft and rigid lenses alongside spectacle dispensing. The unit is aimed at optical dispensaries, optometry practices and contact-lens fitting rooms. A practical step up from spectacle-only lensmeters for clinics with mixed dispensing workflows.
