LG-8B semi-auto lens polisher with handle-set timer — the semi-automatic variant of the LG-8 for labs that prefer hands-on polishing control.
Clinical overview
The OpticsMED LG-8B is the semi-automatic variant of the LG-8 polisher. Same chassis, same direct-drive design, same 115 mm polishing wheel — but with semi-auto polishing-head up/down (operator-controlled) and a handle-set timer (1–5 minutes). Suits operators who prefer hands-on control over fully-automatic operation.
| Voltage | 110/110V/220V, 60/50/60Hz |
|---|---|
| Power | 80 W |
| Weight | 6.7 kg |
| Volume | 350 × 290 × 340 mm |
Operators who prefer hands-on polishing control where the semi-auto operation gives more direct quality assurance than the fully-automatic LG-8. Also fits training programmes teaching polishing technique to junior optical-lab staff.
Available on request
The full spec + documentation pack for this device ships ahead of purchase on request. A sales engineer responds within one business day.
Configuration sheet
Sizes and dimensions, material and finish, compatible instruments and screw references, what ships in the set, lead time and warranty — all in one specification sheet, sent within one business day.
Documents & downloads
This device's IFU, CE Declaration of Conformity, ISO 13485 certificate and (where applicable) FDA 510(k) clearance ship with the order. Reach out below for the pack ahead of purchase.
Get in touch
Our clinical sales team will scope quantities, voltage, accessories and regulatory paperwork — usually within one business day.
Ordered this to replace an ageing unit and so far the components fit and function exactly as described. Support were responsive and helpful with a query. Would order again without hesitation.
Dr. Sven Wilson, OptometristVerified buyerApr 8, 2026
This has quickly earned its place in our exam room — support were responsive and helpful with a query. Delivery was quick and everything arrived well-packaged. A dependable choice for any exam room.
Kevin Evans, Practice OwnerVerified buyerSep 15, 2025
Been putting it through daily use in the practice and it's held up well to consistent daily use. It feels solid and properly engineered. A dependable choice for any practice.
David Evans, Dispensing OpticianVerified buyerJul 20, 2025
LG-8 fully-automatic lens polisher with 5-timer settings, clear hood and direct-drive design — the no-belt-failure polisher for high-volume labs.
LG-8A dual-speed auto polisher for CR + PC — prevents PC lens deformation during polishing through dedicated PC-speed setting.
LG-900A auto lens polisher with high-quality wool wheel — upgraded polishing variant of the LG-900 family, sized for labs that finish premium AR-coated lenses.
LG-900B auto lens polisher with timed wool-wheel cycle for PC, resin and acrylic lens edges — the buffing station that lives next to the edger in mid-volume labs.
The 468-4300 is a combined ophthalmoscope and streak retinoscope inspection / measurement set built around an LED illumination platform and a USB-rechargeable handle. It is supplied in a fitted zipper case for clinic or home-visit use, ready for routine fundus examination and retinoscopy refraction. The rechargeable handle removes the need for disposable batteries and keeps the instrument set ready between cases. It is intended for use by optometrists and ophthalmologists in primary eye-care practice.
The FA-6100BK is the combined auto refractometer/keratometer variant in the FA-6100 family, adding corneal curvature measurement on top of objective refraction in a single workflow. Performing refraction and keratometry on one device cuts patient handling time and helps streamline pre-test for contact-lens fitting and routine eye exams. The desktop format suits optometry practices and eye clinics looking for one consolidated pre-test station. A practical step up from the refraction-only FA-6100B for offices that also need K-values.
The 468-4310 is the premium tier of the 468 inspection / measurement set range, combining an ophthalmoscope and streak retinoscope with a fiber-optic illuminator and an upgraded LED platform. It runs on a USB-rechargeable handle and is supplied in a fitted zipper case. The fiber-optic illumination is intended for clinicians who want a higher-output light path than the standard tier for fundus and retinoscopy work. It is suited for optometry and ophthalmology practices that need a more robust inspection / measurement kit for daily clinical use.
